In general; I think even 2 billion is too much. Nobody needs that much money.

At best; I think no one should be able to have more than about 500 Million. You get one house, and one car for each adult family member if you’re married with non-adult kids. Adult kids don’t add uncounted vehicles; they have their own limit. Anything that is seaworthy or airworthy counts as about as much “Wealth” as you initially spent on it minus a reasonable depreciation rate yearly as determined by the market, so no buying a thing and having it lose 30% of it’s value the moment you drive it off the lot after buying it.

Additionally; to block too many shenanigans; wealth added by any property that is bought sticks; 3 years at minimum. This prevents people from storing too much excess in property and shell-gaming it. A company you own or have stake in cannot lend (in a long term) or gift you property in excess of 1% to 10% the wealth limit. (Depending on what the thing is). Companies may also not hold property or money in lieu of an individual personally; everything the company owns must have a global company function; and not personally benefit one or more people only. (Basically no executive-only or owner-only Jets; everyone from the tiniest manager on up should have access to it if there’s a business reason for it)

Ah; I don’t use Chinese branded phones at all. Never have.

Phones in the US market do not usually have them, unless they’re Samsung branded, and since I don’t include Chinese made phones in that “group”, what I’m saying is true for the US.

Uh, No. Hell to the fucking no. Bring back SD expansion. Treat it like the data storage device it was.

Your beefs with Google are misplaced; because they were trying to mess with what folders were used; and with trying to protect user privacy because applications were misusing storage to violate their user’s privacy.

• Losing SD Expansion sucks; they should bring this back. Only reason they stopped this is greed.
• Yet another Nice-To-Have that is gone; but I’ve never seen any phones that weren’t Samsung with this. This one doesn’t really even affect waterproofing; or phone size so they have no excuse.
• I certainly miss this one; but the FM Radio was present back on my 2020 Moto G6 Power. It was present on my 2020 Moto Edge. This one got stolen from us because we lost the 3.5mm Jack too…they used the wire from your wired headphones as an FM Antenna lead.
• This is nice; but I ended up having to root my Nexus 6 to make this work properly and use all the colors the LED could perform. I don’t really miss it with Bezel-less phones.
• I hate that bootloaders are frequently locked; but it’s been less necessary to root Android as it’s improved over the years. There are still a few pain points; but not quite as many that require root.
• This is another case of greed. There’s no reason why we shouldn’t have removable batteries for phones that aren’t IP67 or higher. If it ain’t waterproof; there’s no reason to seal the battery in…and replaceable batteries is a benefit when they accidentally ship units that become “spicy pillows” when the batteries swell due to bad batteries. It also simplifies disposal of phones; which don’t need disassembly if they’ve got a removable battery.

The rot is deep. Avoiding it often requires you to become a hermit.

You try convincing your tech unsavvy friends to change services, your boss to let you use linux, and all your favorite communities not to use Discord, Google and YouTube. Last of all; good luck finding that one obscure widget you need right now to make something work without using Amazon.

I promise all of the above are harder than they sound. It shouldn’t be harder; but it is.

In aggregate; 5 instances, less than 5 communities, and more than 69, nice, blocked users.

I don’t mess around. I don’t hesitate to block people who argue needlessly, make my experience less informational or less entertaining, troll, or disregard arguments made in foundational logic to push a point of view or ‘win the argument’. Similarly my instance ignores downvotes and does not display them; as with most platforms which behave similarly to reddit; they simply do not work outside of your personal, local account, local instance, user-sorting context.

This is Material You icons; and this is basically not something you can opt out of…that I know of. You may want to find a different Launcher that allows you to load icon packs or disable that Material You behavior. (If yours doesn’t)

Pardon; but I do happen to be a lady; thank you.

The homogenization of these icons has been a long source of consternation for me.

They’re barely functional as icons; you can scroll right by them and miss them; which makes finding the apps in a list of apps a bit annoying sometimes. Removing each icon’s unique color scheme and replacing it with the ‘company 4 colors’ was the stupidest fucking idea ever.

Even more infuriating is how they keep renaming the applications to unexpected things every so often; so they move around; and it’s dreadfully annoying to remember if they prefixed the name of the app with a G or something else completely different, which renders strict alphabetical sorting a bit moot.

As someone who owns a similar set; I can estimate you’re probably dealing with the upsampling issue due to an OS configuration issue. You should try listening to MP3s and FLACs at 44100hz sample rate for your comparison. Not 48000, not 96000.

In general I don’t believe you can tell any difference between MP3 and FLAC if you listen to the audio at the intended sample rate.

Meaning that @44100hz with 8 bit samples; you can’t tell.

Listening at higher sample rates with higher bits per sample; sure…there’s lots of room for unwanted and even audible error. Audio interpolation algorithms are not miracles, not smart, and not even close to being finely psychoacoustically tuned to your ears in most cases.

If you say you can hear a difference…you are lying or you are cheating by playing back the MP3 over an audio pipeline with a higher sample rate and bits per sample. Anyone could hear the difference when cheating like that. Human hearing can span all the way up to 128Khz; but oftentimes most people can’t notice a credible difference even at 96Khz.

But if you listen to a 44.1Khz signal via a 96Khz set of equipment; you’ll pick out exactly when the audio output shifts between being 96Khz and 44.1Khz.

This is how you can tell when audio is a recording at a lower sample rate. Most hardware is capable of outputting 96Khz so long as you don’t put older things in your audio chain (The pipeline from file to your ears, and yes this includes software and your operating system as well).

The problem usually arises when something is upsampled. Going from 44.1Khz to 96Khz is noticeable when you “Compress” the audio signal to boost apparent loudness. Most low-end equipment and unaware software will do this sort of operation automatically when upsampling your audio to make sure the process does not render your audio too quiet to hear. Your ears can hear frequencies being clipped or limited to a certain volume as well; which can also happen a lot to prevent certain issues. Because most people are unable to regulate this hidden software aspect of their playback chain; you can sometimes hear it.

Luckily if you spend some time with proper DSP software and/or hardware, you’ll be able to unmuddle/unmix these mistakes in your chain. It does take time and patience; and you’ll need a large blend of HQ audio (like FLACs or MQTTs) as well as your standard “downsampled” audio (like MP3s and other lossy tracks), and you’ll be able to tweak things so that everything sounds good.

Software packages like Viper4Windows or Viper4Android are good starting points and are often easy to figure out how to use and offer a very wide and diverse range of controls you can use to adjust the audio to your needs and liking.

Because everyone’s ears are different; there’s also plenty of tools that claim to adjust for your individual ears…and those can be helpful as well in chasing your perfect flat audio response curve and equalizing things to your preferences.

Recents [] > Scroll ALLL the way to the beginning > Clear All

Then invoke your Phone’s power menu and Power Off. Wait 10s and then power phone back on.

It’s like playing Uno; but with reverse cards only.

So we have:

• Ad Blockers
• ‘Ad Blocker’ blockers
• ‘‘Ad blocker’ blocker’ blockers
• ‘’‘Ad Blocker’ blocker’ blocker’ blockers
• ‘’‘‘Ad Blocker’ blocker’ blocker’ blocker’ blockers
• ‘’‘’‘Ad Blocker’ blocker’ blocker’ blocker’ blockers’ blockers; and finally;
• ‘’‘’‘‘Ad Blocker’ blocker’ blocker’ blocker’ blockers’ blocker’ blockers; with;
• ‘’‘’‘’‘Ad Blocker’ blocker’ blocker’ blocker’ blockers’ blocker’ blocker’ blockers

in development.

I have a /48 that I can basically roll through.

A /64 is more than enough though to prevent most casual attempts at entry; and does force more work / enumeration to be done to break into a network and do damage with. I’m not saying the privacy extensions are the greatest; but they do work to slightly increase the difficulty of tracking and exploitation.

With a /48 or even a /56; I can subdivide things and hand out several /64s to each device too; which would shake up things if tracking expects a /64 explicitly.

I actually use /55s to cordon off blocks inside the /48 that aren’t used too. So dialing a random prefix won’t help. You’d be surprised how often I get intrusive portsweeps trying to enumerate my /64s this way…and it doesn’t work because I’m not subnetting on any standard behavior.

I run both because of this; and because SLAAC enables features in Desktop OSes that offer some level of additional privacy.

For example; Windows can do “Temporary IPv6 Addressing” that it will hand out to various applications and browsers. That IPv6 address rotates on a periodic basis; once every 24 hours by default; and can be configured to behave differently depending on your needs via registry keys.

This could for example, allow you to quickly spin up a small application server for something; like a gaming session; and let you use/bind that IPv6 address for it. Once the application stops using it and the time period has elapsed; Windows drops the IP address and statelessly configures itself a new one.

I get a free /64 and /48 directly from Hurricane Electric using their TunnelBroker and use PFSense to deploy that v6 locally on my LAN. Everything in the house has a v6 and is protected by the necessary firewalling too.

This is why I use PFSense and Hurricane Electric as a v6 tunnelbroker. I have working functional IPv6 with SLAAC and DHCPv6 and full Routing Advertisements on my LAN running side-by-side so that no matter which the device implements how poorly; it gets an IPv6 address and it works and is protected by the firewall.

Not only did they guess it should be updated; they even left plenty of mechanisms directly in the constitution that allowed for it to be updated radically whenever situations changed so drastically that a supermajority agrees that it should be changed.

Unfortunately that too is the downfall; as those who want to exploit the status quo are also empowered to leverage their money and power to prevent such a majority from taking place. The constitution is far from perfect, and it absolutely should’ve been amended many hundreds of times over, not just the paltry less than 30 times we’ve managed to do so already.

There’s always been an invisible 4th dimensional peg that’s not talked about in most USB-A connectors, and you are required to flip your plug around so many times to get it in to the correct position.

Some of us have that inherent knack to sense the 4th dimensional peg without perceiving it…and thus we do not have this struggle. Meanwhile others completely lack intuition of the aforementioned 4th dimension and struggle endlessly with that peg.

</humor>