Watching the video and the head movement all I see is the Balenciaga ai meme

Sure, most of them are posted here: https://www.printables.com/@StephenSmith

I almost exclusively print functional things so here’s my list of things I’ve designed or printed:

• Tubular key to bypass paying for laundry
• Furniture leg extensions on almost all my furniture to give minimum 4" clearance for the robovac
• Custom mounting bracket / spacer for mounting road sign to the wall with command strips
• Tapestry mounting shim to clamp tapestry in binder clips to hang on the wall without ripping the tapestry
• Rubber band powered sandal holders that stick to the wall and clamp onto sandals which can be used without using your hands / while holding something (I needed to keep my basement sandals from being eaten by my old robovac and I needed to be able to put them on and put them back without needing to put down anything heavy I’m taking to/from the basement, and the space required it to be flat against the wall)
• Replacement shelf pegs for bathroom shelves which are normally only sold in 20 packs for >5$ when I only needed 1, the print cost like 1c instead
• Replacement D-slotted electrical box key since the one that came with the box broke
• Backyard lamp holder that attaches to the fence pole and provides a loop to hang a lamp
• Replacement side panel clip for my PC case which came with 1 broken - manufacturer doesn’t sell replacements
• Custom piece for 2 sectional couch legs to slot into which keeps the 2 halves of my couch from sliding apart causing someone to fall in between onto the floor

Some of this could have been bought online but having a 3D printer really reveals how overpriced plastic stuff is. I rarely print something that costs me more than a few dollars in filament - and that’s if it’s a very large object, it’s easily less than the shipping cost of an equivalent item alone, and small things can often only be found in large packs online while usually costing only a couple cents to print. And plenty of the stuff I print benefits from being able to be made custom and to the exact dimensions I need, for example the furniture leg extensions I made fit perfectly on the furniture legs and raise them up exactly as high as they need to be for my robovac to go under, not a centimeter more. A whiteboard marker caddy I made holds the exact number of markers I have / want to have and attaches under a light switch wall plate which I designed in order to avoid needing to attach it with command strips or screws (it gets clamped between the wall plate and the wall by the existing light switch screws). The first item I listed, the tubular key, was printed with the exact bitting needed for the lock (layer height of 0.05mm is enough vertical resolution for the key to work).

Was also gonna say this since expensive gadgets weren’t excluded. I played a bunch of VR minigolf over pandemic to socialize with my irl friends who I couldn’t hang out with and these days VR has been the center of more than half of the social gatherings at my place where I demo games and we pass the headset around for everyone to try different stuff. Seeing new people try VR for the first time never gets old.

After watching a Jackson galaxy video on how to stop your cat from waking you up early, I followed the advice of never feeding immediately after getting up, and instead doing a certain activity first, like making coffee. After a month of taking a shower before feeding, my cat no longer makes any noise in the morning and only starts getting noisy when I step out of the shower. So thats a good tip for those who can’t free feed. I also started collecting every toy and putting them in a secure box before bed since she has a tendency to chase toys around in the middle of the night and yelp with one in her mouth.

My roborock has been revolutionary for my apartments cleanliness. I’ve had it about 1.5 years and I’ve only emptied the dock’s bag twice (I live in a small apartment). I have the water change kit so it auto refills the docks clean water tank from the laundry hookup and auto empties dirty mop water down the laundry room’s drain. I only have to clean the sensors and rinse the drain screen every 2-3 weeks but otherwise it’s on autopilot on a schedule and my floors are spotless and free of dust and cat fur.

The ribs are the simplest, at its most basic all you have to do is remove the membrane on the back and then curl it up on a trivet over a cup of water, pressure cook high for 25 minutes and let sit under pressure for 10-25 more minutes after it’s done (depending on how fall-off-the-bone you want, I usually like 25mins), glaze with bbq sauce and broil in the oven until it gets a bit of char.

You can also salt & pepper it before putting it in, use apple cider vinegar instead of water, and/or add a few drops of liquid smoke in the instant pot. But it turns out great even when I forget to do those things so really all you need is ribs and sauce.

I got the recipe from here: https://www.pressurecookrecipes.com/easy-bbq-instant-pot-ribs/

Here’s my favorite recipes, I use it every week:

Ribs - easy to get super consistent results, pressure cooking helps keep moisture in. (https://www.pressurecookrecipes.com/easy-bbq-instant-pot-ribs/)

Clam chowder - creamy New England style, I add extra seasonings to amp it up. The clams I get in cans and bottled clam juice so the only non-shelf-stable ingredients are onions, carrots, celery, and garlic (https://recipes.instantpot.com/recipe/new-england-clam-chowder-2/) My additions: To make it more hearty and thick I do 3 cans of clams instead of 2, 4ish strips of bacon bits, an extra stalk or 2 of celery, between 1.5 and 2 lbs of potatoes instead of 1, and parsley and paprika in the same amounts as the thyme and oregano.

Spaghetti carbonara - my new cook book addition. grating the cheese adds more work, but overall still very simple as far as instant pot recipes go - saute the pancetta and reserve, saute onion and garlic, pressure cook pasta in broth, stir in butter, cream, cheese, egg, and pancetta when done (https://pressureluckcooking.com/instant-pot-spaghetti-carbonara/)

Corn chowder - really similar to the clam chowder but good for if you’re not feeling seafood, like most of the recipes I favorite, the steps mostly amount to dumping all the ingredients in, pressure cooking, and stirring in something extra at the end (in this case cornstarch and half&half to thicken) (https://www.tasteofhome.com/recipes/instant-pot-corn-chowder/)

I also use the instant pot some for other recipes but I lean heavily towards 1 pot meals and stuff where I can get away with putting 90% of the ingredients in for the pressure cooking step, that does mean a lot of soups but I’m working on adding more pasta dishes to my repertoire.

(Edited to add recipe links)

I pay for refrigeration destruction, but that’s about it. It’s strongly verifiable, additional, and as permanent as can be. It’s through wren, which seems to be the most strict about credit quality since they removed all the other projects like cooking stoves and tree planting a while back leaving only refrigeration destruction and biochar, which also seems like a quality credit albeit many times more expensive than refrigeration destruction.

That said I don’t treat carbon credits as offsets, just an additional charity that I do on top of doing my best to be sustainable, reducing, reusing / repairing, and responsibly disposing of things. At the end of the day you can only do so much individually so the only way to do more is to put some of your extra money somewhere that might do a little extra good.

It’s worth noting that if you use privacy for free trials, they limit you to 3 cards linked to the same “merchant” (detected by the first transaction that goes through). After 3 cards you have to contact support to reset the limit for that merchant, so the single transaction cards are only good if you never want to shop there again because they immediately burn 1 use out of the limit.

Roborock or robovac, would be nice to keep up to date on new products and share troubleshooting info with other robovac owners / shoppers, but building that community here isn’t a task I’m up to.

A YouTube video by Rollie Williams, mind you - Holder of a masters degree in climate science and policy from Colombia University.

Lately it’s been Sailorsaturdays by Kokonoko https://youtu.be/YfnUim6no3A

A major reason for me is manifest v3 and other shenanigans designed to neuter ad blockers. Secondary to that is promoting web renderer diversity - as a web dev I don’t want to go back to the days where we could only afford to cater to one engine - chromium / blink in this case.

Yeah so you’re essentially holding your breath while you do it, so you’d need to take a break to breathe in and if you’re trying to siphon you would need to seal your lips to prevent losing your progress / prevent the liquid from falling back down. But you can exhale while doing it, which also helps to make sure your don’t accidentally inhale whatever fumes you’re “pumping”.

Granted it’s kind of a silly thing to do and only marginally useful. Each cycle only moves a mouthful of air so I only find it useful for clearing trace amounts of isopropyl fumes from vapes and pipes without hurting my throat, but a fun trick nonetheless if you have the coordination. And depending on the fumes it might still burn your nostrils a bit.

Maybe the better way to explain the technique is: you can close the back of your throat and move your tongue back and forth to push air in and out of your mouth. You can also close your lips and do the same motion with your tongue to push air in and out your nose. All you really need to do is alternate between the two so that instead of pushing the air back out your mouth, you push it out your nose.

Why don’t you just try it…? It’s not that hard to do. Just relax your sinus muscles and close your lips, then alternate between using your tongue to fill the space in your mouth pushing air out your nose and moving your tongue out of the way to create a void, sucking air back in. If you can coordinate this while also alternating between closing your sinuses and opening your lips while you create the void in order to suck air in your lips, and then closing your lips and opening your sinus so that the air gets pushed out your nose, then you’ll be able to pump air from your mouth out your nose without using your lungs.

Ah I thought you meant that you got sick from getting the fumes into your lungs. That’s unfortunate.

Pro tip for sucking volatile gases, you can suck air into your mouth and push it out your nose without it going into your lungs. I do that when I clean glass pieces with iso when there’s still some vapors present. If you exhale out your nose while you do this you can be extra sure none goes into your lungs. Granted you should also be sure you’re actually pulling liquid if you’re trying to syphon, but at least you wouldn’t be pulling into your lungs.

I believe trans refers to gender assigned at birth, so unless someone detransitions or time travels to change their birth gender I don’t think fully transitioning can make you not trans.

The way I see it, that’s just browser history exfiltration with extra steps. Whether they’re sending the actual history or parsing your history and sending topics, both are equally as objectionable to me as both could reveal information about something private you’ve been visiting.