And here I thought people write “1st” because they are lazy and want to press 3 keys instead of 5.

There is no such thing as “zeroith”. Does not matter which numbers you slap on the tables, the one with the lowest number will always be the first. The word “first” has nothing to do with indices, it’s just an antonym for “last”.

I guess I’ll just add you guys to the “overzealous Witcher fans” and consider my point valid.

Yea, Croatia is the only place it got widely used. Is it some kind of historical elective course in Croatian schools? Been a coupe of times in Croatia, never seen Glagolitic in the wild, though. Maybe wasn’t looking good enough.

There is no single person responsible for Cyrillic script. It is mostly believed to be created by mixing and changing Greek and Glagolic scripts by the scholars of Preslav Literary School, which was indeed in Bulgaria. After a while, Peter the Great changed it a lot. And then Stalin stomped out almost all the deviations in the usage of the script.

The last part is mostly why it is considered Russian. A lot of languages suffered because of Moscow just forcing them to use the version of Cyrillic that Russians were using.

It’s a dead script that was not that common in the first place, in Kievan Rus’ it was even used as a form of encryption in XI—XVI centuries for how little spread it was. It is also very different from modern Cyrillic. So, saying “most Slavs don’t know how to read it” is a bit of an understatement. Noone knows how to read it, apart from some linguists and overzealous Witcher fans.

Nah, Georgian is arcs and circles everywhere, like this: ეს ქართული დამწერლობაა.

Well, if you stop listening to people who think it’s a way to get really rich really fast (which it obviously isn’t), cryptocurrencies are quite useful. International transfers are so much cheaper and easier with them.

What’s the name of the show, though?

Probably not, if we’re speaking about the next adapter in the line. They both use 4 pins, and there are no active conversion in the adapter itself, it just connects the pins like this:

USB ↔ PS/2
+5V ↔ +5V
D-  ↔ D
D+  ↔ CLK
GND ↔ GND

So, as long as next adapter is not doing something funny with PS/2 signals, it should be ok for bare USB 2.0 connection.

RiF.

Might depend on where you were learning.

On paper, when I was learning Descartes’ coordibate system, we used Y as up and X as left-right. And when it was time to plot in 3D, we used Z to “extend” the plane into yourself and away from yourself.

You just hold your sheet of paper perpendicular to the ground (or just use a whiteboard) and it all makes sense.

Sometimes inline stuff is more readable.

Don’t worry, I’m quite sure your kind will find something to trip over eventually. No thing can be fully dumb-proof.

You can’t fix stupid.

A slight word of correction, looked at the pinning again, it won’t short circuit them, but one will try to charge the other. It will still be a fire hazard, just not as violent.

If you have two devices with female USB A ports that both provide power via said ports, connecting them with male-male cable will create a short circut. Best case scenario: a current protecting fuse breaks the circuit. Worst case: both processors on both motherboards are dead. Better not think you can connect two computers with that evil thing. That’s why type B connector exists, it’s about the same size, but it never connects to a port that provides power.

The point is that manufacturers can screw up standards and being a symmetrical connector does not cure idiocy in the heads if some people. Yes, the standard explicitly says you have to short opposing data lines for 2.0, but that does not mean everybody will comply with it. (The author of the video is not an idiot, they just demonstrated that it’s possible)

The most common example of this I can think of right away is male-male connectors with type A USB. They are explicitly prohibited, yet many manufacturers create them and use in their products.

That’s why I said that no standard can protect you, you’re just relying on people not being dumb and actually reading the paper you published.

Sure.

You don’t need to check female port orientation, it’s always the same, pins inside the port are looking at the board the connector is soldered to. Of course, unless manufacturer decided to do something funny, but no standard is protected from that.