No it’s not. Unlearning old habits and thought processes is always the first step in learning new things. But to be fair, it’s also the most difficult part.

While other CAD packages do have a better failure path to follow, they still can fail at the same points as FreeCAD. And you still really should be following best practices for ANY CAD package to avoid failures. But people are nothing if not lazy. And fillets and chamfers just suck in any CAD package. It’s always been my practice to never add them until I was done with the modeling. And if major changes where needed, I would remove them if I suspected they could even remotely cause an issue during a change to a model.

You just want to be angry and complain about something don’t you. Either get over it and learn to use FreeCAD or don’t. But whinging is unproductive and useless.

They still have somethings to cleanup and tweak to make the guessing better and more reliable. But it’s on it’s way for sure.

Why does it surprise you much that FreeCAD isn’t like SW? And why do you think it should be?

You can say you have put in the effort to learn it and the effort doesn’t pay off for you. It happens and is nothing to be ashamed of. But the blunt truth is the majority do NOT want to learn anything new because change is scary and simply want to complain about the tiniest difference. If I had a nickle for every time I’ve tried to help someone with FreeCad and they start complaining how FreeCAD isn’t like Fusion360 and why isn’t it, I probably could afford that SW license. No shit, It ain’t Fusion.

There’s a huge difference between a CAD package that has had millions of dollars and multiple development teams spent on it to polish and tweak it into perfection and a small team of volunteers that are working in their basements and backyards for free so they can give it away for free. Why would you be surprised and upset that it can be chaotic and janky. Your choice is to either continue to climb that mountain to master FreeCAD or to move on to something that does make you happy. To quote that famous puppet, " Either do or do not. There is no try"

I will tell you that any CAD package is simply a tool-- a means to an end and not the end itself. And if the tool doesn’t work for YOU after giving it a good try, don’t use that tool. I will also say that despite enjoying the sackcloth and ashes of FreeCAD, I would never recommend it for professional use. It’s not ready for prime time. There are better tools out there for that field of battle. But that doesn’t mean FreeCAD is not a useful tool and can do a lot of impressive things if you wish to spent the effort.

They struggle with FeeCAD for the same reason they struggle with ANY little change in software-- they simply don’t want to be bothered to learn something new. It’s called being lazy.

Much like the Scots ruining Scotland, liberals seem to delight in ruining liberalism. As time passes, I see liberals more worried about some other liberal’s little slot in life. And less and less concerned with getting things done. The Big Picture is eschewed in favor of fighting over minutia.

We get what we are asking for.

Ondsel’s goal was to make money by selling cloud services for CAD users. They were probably bound to fail in that endeavor-- and they did. Still, it was worth a shot. But their biggest contribution to FreeCAD was being the adult in the room and getting all the different groups to agree on how to move forward to solve the biggest problem, the TNP issue that FreeCAD had from the start and couldn’t be arsed to fix. Ondsel’s lasting contribution is the Assembly workbench that is now be the default Assembly workbench for FreeCAD. And it’s a lot better than the other 3 hacked solutions.

realthunder was involved in folding his TPN solution into this 1.0 release. Though my understanding is that it’s different than his implementation. He is now back to his fork and is supposedly cleaning up his code to work better with the mainline branch of FreeCAD to make his code easier to insert.

Personally, I would move to either the stable 1.0 release now or, I you are crazy like me, the 1.1 weekly releases-- brought to you on github every Tuesday and Saturday for your alpha enjoyment of the bleeding edge.

The whole point of the 1.0 release is about mitigating the topological naming issue, (TNP). All 3cad program have problems with it. It can’t ever be fixed, only mitigated. You can break Fusion or SolidWorks just like FreeCad, (I’ve done it). At best the software can only fail a gracefully as possible.

Oddly, despite the 1,000’s of hours of SW myself, I had little difficulty in picking up FreeCAD. Or Fusion or OnShape, (even taught OnShape to high school students), or SolidEdge. Once you understand the design process of CAD, it’s not all that hard. I do have preferences in UI’s and workflows, but that doesn’t mean I can’t use something different.

If you want the best tutorials on FreeCAD, check out mangojelly on youtube. He has a current 1.0 beginner series that starts right from the very beginning. And he goes slow enough to easily follow along.

Ignore the huge number of workbenches. You can even go to the Settings and turn the ones you don’t need off so you never see them again. You are only going to use 2 workbenches 90% of the time-- Part Design and Sketcher. And as you get more experience, you might add another couple of workbenches as you go. Most of the third party workbenches are specialty things. For example, I sometimes need to design and make gears or do small sheetmetal work. So I have the Gear and sheetmetal workbenchs installed. You probably would never need it.

Learning CAD, no matter what flavor, does require effort. It’s as much about learning how to think as it is about learning how to do.

Like the Linux kernel, the cow is merely a means to an end in this example.

Kind of like the butcher who got his hands dirty cutting a steak and then a Michelin star chef cooking it for you.

One got his hands bloody. The other made it delectable for you to eat.

Which is more important to the process?

Yes, dictatorships and monarchies sometimes have a petition process, but they tend only to pay lip service. Not because they care, they will do as they please becaue they have the power-- hence a dictatorship. See: North Korea or a few countries in the middle east. Imagine trying to petition the Afghani government as a gay or worse, a trans person.

Governments of any kind are large and ponderous beasts. They cannot change direction as easily as you would like. And like it or not, there are rules and processes that must be followed to make changes. And those things are in place to provide continuity in government and protections to the populace at large. Imagine how much more damage trump could have done without those processes and rules. Imagine what he could do if he wins again after the last SCOTUS ruling.

Like it or not, Biden is bound by a lawful treaty ratified and codified by congress a long time ago. He cannot undo that treaty on a whim. Only congress can do that at this point. Make your changes there. And representatives and senators are local elections and not national. Best of all, YOU could be the change you want. Don’t expect someone else to do it for you.

But it IS the process to get it done. I never said it was ideal. If you don’t like the process, then vote for those that WILL change the process. But that takes time. Until then, we ARE stuck with the laws we currently have in place. That is the reality of the situation. I hope this helps you understand representative democracy vs a dictatorship.

I’ve never really liked the UI in LibreOffice either. It’s usable, but always felt clunky to me. And it feels so heavy and ponderous to use. That says something from someone who wears the sackcloth and ashes of FreeCAD…

I did use OnlyOffice for a bit and I thought it was better for my needs than LibreOffice. But it was still overkill my current needs. So now I’m down to just AbbyWord and Gnumeric since I only need the odd document and simple spreadsheet.

Edit for missed word

Or more likely, Chrome browser these days…

I have taught an introductory course in 3D CAD in my local high school. The sheer number of kids that have no clue on how to use a simple mouse is astounding. If it ain’t touch screen, they are clueless.

Ding! Ding! Here is the correct answer.

I’m beginning to think that liberals and lefties have no clue how government works and they want a strongman/dictator as much as the magahat idiots. They just want one that aligns with their beliefs instead.

The POTUS is NOT all powerful and can make what ever decisions they want. Controlling the house and senate is far more important than whoever is living in the White House. The House and Senate writes the laws and checks to pay for everything. AND they ratify the treaties making them formally binding.

If you want to stop the genocide, elect the people in the house and senate that will effect the actions needed to make it happen.

I think Win 8 was a YMMV release. I used it heavily for work, (CAD/CAM) and it ran very well. With no more issues than one expects to get from /windows.