I always feel like the actual rack is the cheapest part. Trying for ages to find a simple 2u case for a micro ATX MB with Pico PSU, but don’t find any that isn’t more pricey than the whole setup Oo. Is there some trick to find them used that I don’t know? I expected there would be plenty.

I’m rather certain that a good chunk has no clue about any algorithms and just beliefs that their point of view reflects reality

If somebody would ask for a source it would already be a big improvement. Usually you are just classified as idiot if you dare to have a different view.

Nix is on my infinitely long list of stuff to get into, when I’m in better shape.

ok, thanks. yes I noticed the realtek nic, but unfortunately I haven’t found a single MB with an intel chip below 200euro. So if this really causes issues, I’ll just get a PCIe NIC

they are a bit more pricy, but not much, so I changed that, thanks :)

what do you think about the ASRock B650M PG LIGHTNING, or the ASRock B650 PG LIGHTNING? latter is unfortunately not in stock, but besides the missing heatsink on top and the size I also do not really see a practical difference between the two

that is a good point, our flat is in an older house and feels like we need to vacuum every day… not speaking of the two meowing furrballs roaming around… that bringts me to another important case-related topic… I’ll never again buy a case in which the power buttons are on top… one of my cat was walking over the case and his paw was still small enough to press the power button… in the middle of a dota match… at least it lead to a good story

the one I listed checked all boxes, good thing to look for, for my last one I still needed to have an obsolete windows partition…

thanks for the clarification. I always thought those giant heat sinks, which one often find on gaming boards are snake oil to make it look cooler ;) but anyway… the CPU I am currently aiming for has a TDP of 65W, so that should be fine… GPU I don’t know yet, there I might reiterate. I’ll definitely keep it on my radar.

I really would love to have such a setup, but only if I have a “stable” daily driver as fallback.

thanks for your input. for that purpose I recently built a low power N100 homeserver with a zfs setup. Electricity is really expensive here, so I didnt want to run a performance CPU and GPU 24h (even in idle)

thanks for the hint, I read not to good stuff about HDMI as well as of late. If that fails, I’ll just use the DP connectors :)

you already wrote, what I wanted to answer, I might also get into development myself again at some point. Further my hardware usually lasts for 5-10 years, so it should have some upgrade potential :) and both of us are not so much into “mobile” gaming, somehow that sounds for me, like playing with a gameboy on speed, but that might be my age speaking ;)

I actually read both sides, depending on the use case and the novelty of the hardware. AFAIK, AMD has superior long term support, because their drivers are open source, but NVIDIA might surpass for cutting-edge hardware, but those are just opinions I caught. Anyway, here I’ll settle with AMD for now.

thanks for the input and the link. Yes the MB I am worried about the most. The last I had shipped with a buggy BIOS, and the published updates were even worse… but it is really hard to know in advance, otherwise the listed one has all IO, that I need.

thanks for the hint, I was now looking into it briefly. It seems to be particularly good for badly optimized games, or possibly older (like sc2, which is not really using multi-threading), is that correct? concerning offers… the closest to my current I found was 7800X3D which is with 376€ quiet more expensive, otherwise I found the AM4 variant 5700X3D for only 225€ (of course would need to change MB and ram), but can’t figure out, how the performance difference is. Do you have an idea if the letter is an upgrade from my original idea (7700)?

ah, found the button, thanks

Thanks, is it possible to just cross post to another community, or do I need to copy& paste the text? Haven’t some much posting on Lenny yet

Good point, thanks. I had the same with a tiny homelab, which I assembled recently. What do you mean with barbone Vrm design? I’m not familiar with this