I click on my “From” address and then select “Customize From Address…”. I can then type anything I want up there. It’s a little annoying when replying to an email chain with an alias, but not too many steps.

*mooshrooms

A lot of phone modems ship with their own SoC (processor) running its own OS. It’s much smaller and slower than the main phone SoC but, depending on its implementation, it can have full access to all of your main processor’s memory through DMA.

I was amazed that we transitioned from one GPU heavy bubble (Crypto) to another (LLM/AI). Whilst the hype for crypto imploded the use for the hardware sort of didn’t. I wonder if the next bubble with be the same, or if we get some refreshing variety to our money sinks?

Microsoft et al are subsidizing GenAI to an insane degree. […] prices shoot up for their customers and serve as a rough awakening to all the websites that integrated a crappy chatbot.

I’ve run some much simpler chatbots on just my desktop PC, so they will have some fallback (if they really choose to take it). Still it locks up my entire computer for a few second for each reply, so even a few hundred users per second peak would be an expensive service.

(Insert joke here about customers not noticing or caring about the difference between website chatbots built on big company services vs smaller ones, because they have exactly the same problems just in different hues.)

I’m confused. Sacholding?

We rented our technology and could not read nor write.

Bad bot. Several of your selected sentences are verbatim repeats.

I wouldn’t know, but it’s totally not on there, or so I’ve been told.

There have been constant news articles coming out over the past few years claiming the next big thing in supercapacitor and battery technologies. Very few actually turn out to work practically.

The most exciting things to happen in the last few years (from an average citizen’s perspective) are the wider availability of sodium ion batteries (I believe some power tools ship with them now?), the continued testing of liquid flow batteries (endless trials starting with the claim that they might be more economic) and the reduction in costs of lithium-ion solid state batteries (probably due to the economics of electric car demand).

FWIW the distinction between capacitors and batteries gets blurred in the supercapacitor realm. Many of the items sold or researched are blends of chemical (“battery”) and electrostatic (“capacitor”) energy storage. The headline of this particular pushes the misconception that these concepts can’t mix.

My university login no longer works so I can’t get a copy of the paper itself :( But from the abstract it looks first stage, far from getting excited about:

This precise control over relaxation time holds promise for a wide array of applications and has the potential to accelerate the development of highly efficient energy storage systems.

“holds promise” and “has the potential” are not miscible with “May Be the Beginning of the End for Batteries”.

Only for certain types of capacitors. In practice they can overlap quite a bit, especially with common aluminium electrolytic capacitors (these form & dissolve complex aluminium oxide & hydroxide layers on the plates).

Meanwhile the fan PC port is absolutely amazing. I couldn’t play my copy of PD on my actual N64 because the low framerate made me motionsick, the fan-made PC port runs smooth.

This makes me remember what happened with the re3 and revc (GTA III and GTA Vice City) projects. Fans fixed so much in those games, in their spare time, and published it as a patch (so you still had to own the games). Take Two DMCA’d and sued them just before releasing their the maligned “GTA Trilogy”. I wonder if Microsoft would have done the same before releasing new Perfect Dark content?

Oh. Back to resistance: Doesn’t really matter audio quality doesn’t care it’s still the same AC signal just with less amplitude

Only for ideal resistors.

Resistors are noise sources. Intentional resistors tend not to be too bad (and probably won’t be heard in this situation unless you have super-high-impedance headphones, perhaps 10’s of K), but unintentional resistors (eg corroded unstable metal contacts inside a plastic part) can be atrocious.

A few things to add to this:

(1) If your resistor acts even slightly like a diode then you will encounter partially rectified RF signals (more noise yay). Metal oxides between metals can do this, eg if the connector has crimped two badly-plated bits of metal together.

(2) Plasticisers in some plastics can leak out, causing corrosion on unseen internal metal parts.

(Of course linking all of this together is just conjecture, the causes of Moss’ bad adaptors might be something completely different)

learned from experience the differences between using a standard jack and an XLR, and I can say that the sound is vastly cleaner with XLR (at least on a set).

Your experiences were correct, don’t doubt them. That would have been ground-referenced equipment, ie plugged into wires that eventually join a wall. RF interference would interact with that quite differently, unbal vs bal would be quite different.

This could end up competitive.

Invite people to your house, give them a tour and briefly mention the shelf before scurrying them on. Watch their faces contort but don’t give them the opportunity to ask any questions.

EDIT: I have a vague guess at what could have gone wrong with your adaptor. It might have had OK L and R contacts but a broken G contact. You would then hear the difference between the L and R channels, which most often sounds like garbage. Music would be weird (entire instruments/vocals disappear) and mono audio would be silent or near-silent (so you’ll have to turn it up a lot and will hear noise).

Balanced will reduce noise (in terms of RF noise, of course) significantly better than unbalanced,

In this situation I don’t think it will at all.

I don’t think that balanced vs unbalanced is actually electromagnetically that different in this particular configuration (see my edit at the end of above). Things like where the wire is sitting on your body and what pose you are in will probably affect RF noise pickup levels on the headphone wires much more than changing between bal & unbal signalling.

but the source of noise does need to be far enough away from the capturing device to not affect it directly and, therefore, be able to be negated by the balanced cable.

I didn’t get into near-field and far-field effects. I’m not sure that it really matters here, but I might be wrong.

That’s really weird o.o The adapters should just be metal and plastic, same as the cables.

Maybe they have a really weak connection internally, ie high resistance? This might lead to both lower volume in the headphones and (in some circumstances) higher noise, especially if it’s an unstable resistor.

I recommend starting a shelf of cursed items :)

I don’t like adaptors, as they almost always noticeably reduce audio quality.

Huh? 3.5mm to 6.35mm adapters, the small bits of metal and plastic, or are you talking about something else?

I wouldn’t say placebo. It’s definitely doing something.

I would say this is still a placebo. Placebos always still do something. A sugar pill tastes sweet and modifies the sugar levels in your blood. The important questions are validity and effectiveness, not whether or not it does something.

Balanced audio will not eliminate noise in most of the circumstances where a headphone user hears noise. There are far more likely sources (the source file itself, DAC limitations, audio amp limitations, external sound from their environment, etc). It will help in some very specific circumstances, but that’s like trying to sell snow chains to all car owners on the planet because you can claim that they improve traction.

If you do work in an environment where changing to balanced headphone signalling helps… why are you working with your head inside an RF hazard zone?

(From page): However, balanced audio does a better job of eliminating noise, should it exist in your signal. In a case where extraneous noise is present

Misleading.

Noise exists in all signals. Balanced audio only “does a better job” in circumstances other than what this product is being sold for. Discussing this at all gives it false merit anyway.

EDIT: Giving this some further thought: balanced and unbalanced signalling is mostly moot when you’re an isolated device with one cable attached. From an RF standpoint you’re not forming both halves of an antenna (dipole or monopole+ground). Electrically they both look extremely similar in this scenario. Your partially conductive human arms waving around will probably couple to RF noise better than the headphone cable.

Slashdot.org

Don’t forget its fork, https://soylentnews.org

A good search term is “SSD over-provisioning”

The file size discrepancy is usually due to 1000 vs 1024

No, that’s something else entirely. It doesn’t matter what measurement system you use, the drive juggles more sectors than your OS can see.

but filling the drive with random data until its full should wipe the drive.

Only if you assume people can’t access the reserved/unallocated/over-provisioned sectors. If you are only worried about small thieves then this might not be an issue. If you’re handling sensitive data (like medical records for other people or anything with sensitive passwords) then it’s completely inadequate to leave any form of data anywhere on the disk.