Never pay another DVD rewind fee again! Compatible with all disc formats: DVD-R, DVD-RW, DVD+R, DVD+RW, CDR, CDRW, Audio CD, VCD. Multi-region, code-free rewinder capable of rewinding all 6 region DVD’s including RCE/REA encoded discs

  • SheritaX@discuss.tchncs.de
    link
    fedilink
    arrow-up
    1
    ·
    6 days ago

    How to Clean Scratched DVDs how to clean dirty dvd discs

    Using Toothpaste All you have to do is take a little bit of toothpaste and rub it on the DVD. Smear it in a circle to make sure that no stones are left unturned. With the help of water, clean the toothpaste. Using Furniture Polish Furniture polish can do wonders when it comes to cleaning DVDs. When using polish, all you have to do is rub the disc with the polish to make sure that every area is covered. Using Repair Kits The kits are able to get rid of most surface scratches on CDs and DVDs. A complete set kit often comes with a bottle of disc repair liquid, a bottle of disc cleaning liquid, and a soft cloth. Using Banana All you need is a banana and nothing else. Slice the peeled banana and smash a couple of slices. Smear the mashed banana onto the surface of the DVD in circles. Next, take out the peel and repeat the same process. Using Vaseline Rub a little bit of the Vaseline jelly on the scratched DVDs. Spray some cleaner or water on the disk and use a soft cloth to remove all the jelly. Do this until no Vaseline and water is left. How to Clean DVDs with Heavier Grime and Stains

    Materials You’ll Need:

    Soft microfiber cloth (or a lint-free, soft cotton cloth) Distilled water (to avoid mineral buildup) Isopropyl alcohol (preferably 70% or higher) Mild dish soap (optional for heavy stains) A soft-bristled brush (optional for stubborn grime) Compressed air (optional, for removing dust) Step-by-Step Cleaning Process:

    Dust Off the Surface: Before using any cleaning solution, blow off any loose dust and dirt from the surface of the disc. Use compressed air or gently wipe with a dry microfiber cloth in a straight line from the center to the outer edge (never in circular motions). Prepare Cleaning Solution: For mild grime, mix a small amount of mild dish soap with distilled water. For more stubborn stains, you can use a mixture of isopropyl alcohol and distilled water (roughly 70% alcohol to 30% water ratio). Avoid harsh chemicals like window cleaners or products with ammonia, as they can damage the disc. Clean with a Cloth: Dampen a soft microfiber cloth with the cleaning solution (don’t soak it, it should be damp, not wet). Wipe the disc gently from the center outwards in a straight line. This reduces the risk of leaving streaks or causing scratches. Be sure to avoid circular motions, as these can damage the data layer over time. Dry the Disc: Use a dry, clean microfiber cloth to gently wipe the disc, again working from the center to the outer edge to dry it completely.

    It is a good thing to back up physical DVDs by ripping the data somewhere safe. Ripping DVDs to an external hard drive or your computer can be very handy, thereby providing you with an easy way to get back your files in case your discs are scratched. This allows you to skip the usage of physical discs overall. And the best way to rip DVDs is using DVDFab DVD Ripper. The tool is an ideal choice to rip your DVDs, or to convert your DVD to ISO with DVDFab DVD Copy. It can convert any DVD to different formats to save them digitally. The output format is compatible with different devices as well. Below are some noteworthy features of this tool. Have a look.

  • Tylerdurdon@lemmy.world
    link
    fedilink
    arrow-up
    116
    ·
    8 months ago

    I’m wondering if we’re at the stage where the joke is missed because the average age of users never experienced the CD.

    • VaultBoyNewVegas@lemmy.world
      link
      fedilink
      arrow-up
      30
      ·
      8 months ago

      I’m of the age where I can remember having a load of rewritable cds and DVDs plus those things that supposedly cleared up scratches now those were a scam too.

      • otacon239@feddit.de
        link
        fedilink
        arrow-up
        30
        ·
        8 months ago

        Usually the home versions were scams, but there were better quality ones out there that would remove just a little bit of the top layer, making a smooth finish again. Although deep scratches obviously couldn’t be repaired in this case.

          • Rhynoplaz@lemmy.world
            link
            fedilink
            arrow-up
            6
            ·
            8 months ago

            Sometimes it did! I tried it on a disc that was so messed up, I figured out couldn’t make it work any less, and wouldn’t you know, it worked for the first time in a long time. Other times, not so lucky.

            • Ms. ArmoredThirteen@lemmy.ml
              link
              fedilink
              arrow-up
              5
              ·
              8 months ago

              Most toothpaste is slightly abrasive so depending on the scratches it can definitely work as a polish. I’d always steal my dad’s special glass polish and it was basically like toothpaste

              • theneverfox@pawb.social
                link
                fedilink
                English
                arrow-up
                2
                ·
                8 months ago

                I learned how to polish glass fiber… It’s not any different from polishing anything else, except the “sandpaper” is smoother than normal paper

                Toothpaste is an abrasive… Partner it up with finer and finer abrasives and you could get a cd clearer than new

      • Track_Shovel@slrpnk.net
        link
        fedilink
        English
        arrow-up
        6
        ·
        8 months ago

        I had one that was a hand crank thing. It actually worked pretty well. Whenever I thought that was it for my Diablo II CD, I would run it though there and Presto: good as new.

        My Xbox 1 also had this weird thing where it sounded like it was fucking eating the CD too. If it got too grumpy we would use the crank and boom: back to teabagging people in Halo.

    • CarbonIceDragon@pawb.social
      link
      fedilink
      arrow-up
      13
      ·
      8 months ago

      Doesn’t the fediverse userbase trend towards being made up of millennials? I’m on the older end of gen Z myself and grew up with CDs and DVDs, so I imagine most people here are familiar with the technology.

      • eatham 🇭🇲@aussie.zone
        link
        fedilink
        English
        arrow-up
        1
        ·
        8 months ago

        I’m on the younger end of gen z and still know what the are, never actually use them but we have lots. I feel most of us know what old stuff like CDs are because of the Internet tho.

    • Zerush@lemmy.mlOP
      link
      fedilink
      arrow-up
      3
      ·
      8 months ago

      Gaming disks still exist, also music CD, even vinilos have a comeback.

  • SatansMaggotyCumFart@lemmy.world
    link
    fedilink
    arrow-up
    33
    ·
    8 months ago

    Last year I spent $787 on Blockbuster charges for not rewinding my DVD’s.

    With this I could make money rewinding other people’s DVDs for a small fee.

  • Ginger666@lemmy.world
    link
    fedilink
    English
    arrow-up
    22
    ·
    8 months ago

    I HATE THIS PRODUCT!!!

    IT DOES NOT REWIND SACDS!!!

    MY PINK FLOYD ANIMALS SACD IS STUCK ON PIGS ON THE WING PART 2 HALLLLP

    • kshade@lemmy.world
      link
      fedilink
      arrow-up
      9
      ·
      edit-2
      8 months ago

      They used to make ones that can do both sides at once, but they were too complicated, expensive and basically immediately outdated when dual layer DVDs came around.

  • Destide@feddit.uk
    link
    fedilink
    English
    arrow-up
    20
    arrow-down
    1
    ·
    8 months ago

    Reminded me of the scratch removal services some game stores offered

      • itsonlygeorge@reddthat.com
        link
        fedilink
        arrow-up
        7
        ·
        8 months ago

        Yup. The data was encoded on the back of the plastic disc. So long as the “label” surface wasn’t scratched you can resurface the bottom.

        • andrew@radiation.party
          link
          fedilink
          arrow-up
          5
          ·
          8 months ago

          It was more common for commercial discs and some consumer discs to have the data layer sandwiched between the bottom surface and label layer, especially later in cd/dvd’s heyday, to prevent tiny scratches on the label or sharpie marks from destroying bits in the data layer.

          • MystikIncarnate@lemmy.ca
            link
            fedilink
            English
            arrow-up
            1
            ·
            8 months ago

            There was still a wear layer below the data layer which could be resurfaced. So the services worked.

            Commonly it worked by removing some material from the bottom wear layer to remove the damaged bits, so it didn’t work forever. You would eventually run out of material to remove and trying to repair it would result in a catastrophic failure of the media.

            Writable disks however, not so good.

  • son_named_bort@lemmy.world
    link
    fedilink
    arrow-up
    16
    arrow-down
    1
    ·
    8 months ago

    Of course it’s a scam. You can easily rewind DVDS in your DVD player. You don’t need a separate device.

    • Zerush@lemmy.mlOP
      link
      fedilink
      arrow-up
      12
      ·
      8 months ago

      I always used a pen in the hole and turning it backwards by hand, also works.

  • TheRedSpade@lemmy.world
    link
    fedilink
    arrow-up
    11
    ·
    8 months ago

    One of the grocery stores in my town also had video rental. When they started carrying DVDs, they put the “Be kind, Rewind” stickers on the cases.

  • MystikIncarnate@lemmy.ca
    link
    fedilink
    English
    arrow-up
    10
    ·
    8 months ago

    I suspect a few people bought this legitimately. When the CD/DVD revolution happened, a lot of the quattrogenarians spent their entire home video experience inundated with “be kind, rewind” slogans from rental shops. Being fairly frugal and not wanting to pay the extra to have the shop rewind the video for them, they would be obsessed with rewinding a video before returning it. I imagine that some used this unironically to appease their elders into thinking that it was “rewound” before returning rentals. It’s useless, sure, but it would have completed the “rewind” step, preventing the unnecessary (and non-existent) rewind fees for mildly dementia ridden elders during the early DVD era. Just having that extra step would appease their need to do it, and prevent complaints and re-explanations that DVDs don’t need it.

    Just put it on the thing, make it spin backwards for a minute, then package it up. It’s useless to explain that you don’t have to do that because they won’t remember it, and the next time they play a DVD, they’ll just be looking for a way to rewind it again.

  • Batting1000@lemmy.world
    link
    fedilink
    arrow-up
    11
    arrow-down
    1
    ·
    8 months ago

    I don’t know about rewind. As a child of the 90’s, you lay that sticky label on there, let your older sibling press the freshly burned disc onto it, and bam, you have a homemade mix CD before Lars can shut down Napster.

    As a Metallica fan, I do repent my Napster days, though.